The Boya BY-WM6 UHF Wireless Microphone System consists of a wireless transmitter, receiver and an omni-directional lavalier microphone, stored safely inside a sturdy hard case.
It provides a complete wireless microphone system suitable for use in all video and filmmaking situations.
The system has been designed for ENG, EFP and DSLR video and requires just 2 x AA batteries to supply power each unit, providing up to 8 hours of continuous operation.
The clear, easy-to-read display allows for easy operation whilst providing essential information such as the current UFH channel, volume level and battery life.
With over 48 UFH channels, you can be sure of uninterrupted, crystal clear audio that will reach a range of up to 100m (without obstacles). You can monitor the audio continuously using the headphone monitoring functionality and you can adjust the volume/mute directly from the transmitter.
The receiver and transmitter are lightweight, yet sturdy, allowing for easy transportation. Mounting each unit is simple because of its sturdy build and integrated belt-back clips. Whilst the removable cold mount on the receiver enables you to securely mount the unit to your camera's shoe mount. You can then connect the unit to your camera using the supplied 3.5mm mini jack to jack cable. The 3.5mm jack ports located on the transmitter and receiver have locking threads which ensure a perfect connection at all times.
System:
Oscillator type: | PLL Synthesized Control Oscillator |
Carrier Frequency Range: | 576MHz-599MHz |
Channels: | 48 |
Frequency response: | 60Hz-15 KHz /-3 dB |
Operation range: | 100m (300')(without obstacle) |
Operating temperature: | 14° F to 122° F (-10℃ to 50℃) |
Storage temperature: | 14° F to 131° F (-10℃ to 55℃) |
RF output power: | ≤10 mW |
Antenna: | Flexible |
Spurious emission: | 250 nW or less |
Audio input connector: | 3.5mm mini jack |
Audio input level: | 600 mV-2000 mV |
Reference deviation: | ±7KHz (-60 dBV, 1 KHz input) |
Input frequency range: | 20 Hz-20 KHz |
Power supply: | Two AA batteries |
Operation time: | 8 hours |
Dimensions: |
(H x W x L) 4.2” x 2.6” x 1.1” (10.6 x 6.7 x 2.9 cm) |
Weight: | 95g (3.4 oz) without batteries |
Receiver:
Antenna: | Flexible |
Audio input connector: | 3.5mm mini jack |
Signal-to-noise ratio: | 80 dB |
Distortion: | 0.8% (-60 dBV, 1 KHz input) |
Earphone output level: | 120 mV |
Power supply: | Two AA batteries |
Operation time: | 8 hours |
Dimensions: |
(H x W x L) 4.2” x 2.6” x 1.1” (10.6 x 6.7 x 2.9 cm) |
Weight: |
98g (3.5 oz) without batteries |
Transducer: | Back electret Condenser |
Polar pattern: | Omni-directional |
Frequency Range: | 35Hz ~ 18 KHz |
Signal / Noise: | 74dB SPL |
Sensitivity: | -30dB /-3dB / 0dB=1V/Pa, 1 kHz |
Connector: | 3.5mm locking mini plug |
Length: | 1.2m (4’) |